Blackmagic Design OpenGear 20 Slot Frame (with fans and one PSU)

Kataloški broj: OG-FR-CN-P

Garancija
Plaćanje karticom
Dostava
Pakiranje

PDV uračunat u cijenu

  • openGear frame combines function, flexibility and power with advanced features like high-power 450W redundant power supplies, Gigabit Ethernet access to every card slot, 20 openGear card slots, a dedicated 21st card slot
  • This frame unit offers the flexibility of independent rear modules for connectivity to a wide array of interfaces such as BNC, twisted-pair audio and fiber
  • Can accommodate 2 front-loaded PS-OG3 power supplies. The split outside location of the power supplies allows for easy installation when utilizing an alternate phase power source
  • Designed with an advanced cooling architecture that provides increased ventilation. Front door mounted cooling fans provide forced air cooling to all cards with front to back cooling
  • This unit comes standard with Ethernet connectivity for basic configuration and monitoring of openGear cards through the DashBoard control system. An advanced networking card, the MFC-8322-N adds an on-board Gigabit Ethernet switch, with GigE access to each of the 20 processing card slots
  • Dostupno u roku 15-20 radnih dana
Dodaj na listu želja
Dodaj na listu želja

Opis

Blackmagic Design OpenGear 20 Slot Frame (with fans and one PSU)

The Blackmagic Design openGear 21-slot frame combines various features to deliver optimum speed, power and flexibility. Along with 20 openGear card slots, this unit also features a dedicated 21st card slot, which is suitable for internal reference distribution and network control. Every card slot in this unit is provided with Gigabit Ethernet access. The presence of a LCD display helps in the identification of faults and IP addresses. A redundant power supply of 450 W is also featured in this unit. This frame unit incorporates a well-designed cooling architecture that provides increased ventilation and cooling to all cards. A built-in intelligent fan controller automatically adjusts the fan’s speed based on changes in the temperature and power supply. The frame also features a GFC-8322 card that distributes reference signals to openGear cards installed in the frame.

Additionally, Ethernet connectivity comes standard with this unit for monitoring all the openGear cards via the DashBoard control system. A single dedicated slot is provided in this unit for connecting with a full network controller card.

Card slot
  • 21
Number of inputs
  • 2 looping
Level
  • 1 Vpp nominal
Signal
  • Analog video sync (black burst or tri-level), or AES/EBU DARS
Impedance
  • 75 ohm terminating
Return loss
  • >30 dB to 30 MHz
Maximum DC on reference input
  • +/-1 V
Maximum power 1
  • 300 W, total power consumption not to exceed 15 W maximum per card slot
Maximum power 2
  • Frame controller and fans total: 37.5 W maximum
  • GFC-8322 card total: 3.9 W maximum
Power supply
  • Input: 100 to 240 V AC, 47 to 63 Hz, 500 W
  • Output 1: 12 V, 28 A, 336 W nominal
  • Output 2: -7.5 V, 5 A, 37.5 W nominal
  • Total: sum of both outputs not to exceed 375 W maximum
Operating temperature
  • 0 °C to 40 °C
Relative humidity
  • <95% non-condensing

0 recenzija za Blackmagic Design OpenGear 20 Slot Frame (with fans and one PSU)

0.0 prosjek
0
0
0
0
0

Budite prvi koji će recenzirati “Blackmagic Design OpenGear 20 Slot Frame (with fans and one PSU)”

Još nema recenzija.