Blackmagic Design ATEM Studio Converter 2

Kataloški broj: SWRCONVRCK2

Garancija

Plaćanje karticom

Dostava

Pakiranje

PDV uračunat u cijenu

4 bidirectional converters in 1 RU unit
Optical fiber signal range 45 km
Connects up to 4 ATEM camera converters
4x fiber to SDI 10-bit converters
4 x switchable SD/HD-SDI outputs
Camera talkback with select, volume and mute
Connect to ATEM switchers/converters
Supports SDI switcher tally output
Dostupno u roku 15-20 radnih dana

Opis

Blackmagic Design ATEM Studio Converter 2

The Blackmagic Design studio converter 2 inputs SDI video signals transmitted over optical fiber and converts the signals to SDI for use with video switchers. When used in conjunction with the Blackmagic Design ATEM camera converter, you can send video signals up to 45 km between camera and switcher using available optical fiber cables. By comparison sending an HD-SDI signal over traditional copper cable is usually limited to about 90 meters, depending on the quality of the cable.

A typical set up using the studio converter 2 is to connect it between the switcher and up to four ATEM camera converter units. This set up allows the converter 2 to receive the signals from the fiber cable, convert the signals to SDI using 10-bit processing, and send the signals to the switcher. The converter 2 supports SD/HD signals, and when using the available ATEM camera converter you can use any camera with an SDI/HDMI output.

The converter 2 can also be used as 4 independent simultaneous bi-directional SD/HD-SDI to optical converters. The converter 2 features a built-in mic input, speaker and headphone jack that provides talkback audio for communicating with camera operators. The converter 2 passes tally signals embedded in the SDI program stream. You can cascade multiple ATEM studio converter 2 units together when using more than 4 cameras. The studio converter 2 features a 1RU design with built in rack mount ears for easy integration into existing studio configurations or production cases.

HD format support	1080p 60/59.94/50/30/29.97/25/24/23.98 1080PsF 30/29.97/25/24/223.98 1080i 60/59.94/50/ 720p 60/59.94/50
SD format support	NTSC: 525i 59.94 PAL: 625i 50
SDI video input	4x 10 bit SD/HD switchable camera inputs 1x 10 bit SD/HD switchable program input from switcher, including Tally information embedded in the SDI signal
SDI compliance	SMPTE 259M, SMPTE 292M
Video sampling	4:2:2
Color precision	10-bit
Color space	REC 601 REC 709
Optical fiber video input	4x single mode SD/HD switchable camera inputs with LC connector
Optical fiber	Input: 4x single mode LC connectors for video with embedded audio, channels 1 & 2 are camera audio, channels 15 & 16 are talkback audio Output: 4x single mode LC connectors for video with embedded audio, channels 1 & 2 are camera audio, channels 15 & 16 are talkback audio
Audio sampling	48 kHz 24-bit A/D conversion
Analog audio output	4x 3-pin XLR balanced audio pairs (1x pair per fiber input) 2x RCA jacks provide a L/R stereo pair
Talkback	1x 1/4-inch TRS headphone jack 1x 3.5 mm TRS microphone input for use with aviation style headset 1x 3-pin XLR connector for talkback microphone 1x integrated speaker
Talkback control	8x front panel buttons for camera operator selection, lock, mute and un-mute
AES/EBU talkback loops	Input: 1x BNC microphone input, 1x BNC headphone input Output: 1x BNC microphone input, 1x BNC headphone input
OS compatibility	Mac OS X 10.7 Lion and later, Mac OS X 10.8 Mountain Lion and later Windows 7, Windows 8
Computer interface	1x mini-B type USB 2.0 connector for initial setup, firmware updates and converter utility software control
Power requirements	110 - 220 V AC, 50/60 Hz 12 - 31 V DC redundant input

Brand